Dragonfly Publication Index - Dragonfly

Aleksandra J. Gawronska (1), Claire L. McLeod (1), Erika H. Blumenfeld (2) (3), Romy D. Hanna (4), Ryan A. Zeigler (5) Icarus. Volume 388 (December 2022). DOI: https://doi.org/10.1016/j.icarus.2022.115216

Standardized and axially vascularized calcium phosphate-based implants for segmental mandibular defects: A promising proof of concept

December 17, 2022

The effect of differential mineral shrinkage on crack formation and network geometry

December 17, 2022

In vivo visualization of butterfly scale cell morphogenesis in Vanessa cardui

December 03, 2022

Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures

November 24, 2022

Quantitative 3D orientation analysis of particles and voids to differentiate hand-built pottery forming techniques using X-ray microtomography and neutron tomography

November 17, 2022

An efficient virtual modeling regard to the axial tensile and transverse compressive behaviors of the twisted yarns

November 15, 2022

Deep Learning-Based Segmentation of Cryo-Electron Tomograms

November 11, 2022

Investigation of the Causes of Premature Rain Erosion Evolution in Rotor Blade-like GFRP Structures by Means of CT, XRM, and Active Thermography

November 08, 2022

Three Regimes in the Tribo-Oxidation of High Purity Copper at Temperatures of up to 150 °C

November 02, 2022

Unraveling pore structure alternations in 3D-printed geopolymer concrete and corresponding impacts on macro-properties

November 01, 2022

Effect of capillary fluid flow on single cancer cell cycle dynamics, motility, volume and morphology

November 01, 2022

Micro-Computed Tomography (µCT) Study of Clogging in Long-Used Strip and Cylindrical Drip Emitters

October 28, 2022

Feature-based volumetric defect classification in metal additive manufacturing

October 26, 2022

Multiphysics study on cement-based composites incorporating green biobased shape-stabilized phase change materials for thermal energy storage

October 20, 2022

Evaluating inflammations in high-resolution x-ray phase contrast images of SKG spondylarthritis mice models

October 14, 2022

Multi-Tissue Analysis Using Synchrotron Radiation Micro-CT Images

October 14, 2022

Spatial Quantification of Microstructural Degradation during Fast Charge in 18650 Lithium-Ion Batteries through Operando X-ray Microtomography and Euclidean Distance Mapping

September 26, 2022

Multi-scale characterization of granular media by in situ laboratory X-ray computed tomography

September 20, 2022

Processing of micro-CT images of granodiorite rock samples using convolutional neural networks (CNN), Part I: Super-resolution enhancement using a 3D CNN

September 18, 2022

Novel 3D Printed Modular Tablets Containing Multiple Anti-Viral Drugs: a Case of High Precision Drop-on-Demand Drug Deposition

September 15, 2022

Enhancement of Scanco micro-CT images of granodiorite rocks using a 3D convolutional neural network super-resolution algorithm

September 01, 2022

Penetration of Water-Soluble Material through Gas-Cleaning Filters

August 12, 2022

Deep learning-based noise filtering toward millisecond order imaging by using scanning transmission electron microscopy

August 05, 2022

Using Machine Learning Algorithms for Water Segmentation in Gas Diffusion Layers of Polymer Electrolyte Fuel Cells

August 04, 2022

Deep-XFCT: Deep Learning 3D-Mineral Liberation Analysis with Micro-X-ray Fluorescence and Computed Tomography

July 22, 2022

Automatic Nondestructive Detection of Damages in Thermal Barrier Coatings Using Image Processing and Machine Learning

July 22, 2022

C698R mutation in Lrsam1 gene impairs nerve regeneration in a CMT2P mouse model

July 16, 2022

Assessing Anatomical Changes in Male Reproductive Organs in Response to Larval Crowding Using Micro-computed Tomography Imaging

July 05, 2022

A new pan-kinosternid, Leiochelys tokaryki, gen. et sp. nov., from the late Maastrichtian Frenchman formation, Saskatchewan Canada

July 03, 2022

Quantifying the Effects of Carbides and Pores on Fatigue Damages of Ni-Based Single Crystal Superalloys at Elevated Temperature Using X-Ray CT Scans

May 31, 2022

Influence of pore fluid pressure and differential stress on gypsum dehydration and rock texture revealed by 4D synchrotron X-ray tomography

May 27, 2022

A novel approach to assess volumetric bone loss at immediate implant sites and comparison to linear measurements: A pilot study

May 24, 2022

Assessment of the fitness of removable partial denture frameworks manufactured using additive manufacturing/selective laser melting

May 23, 2022

Deep learning for full-feature X-ray microcomputed tomography segmentation of proton electron membrane fuel cells

May 21, 2022

A Review and Case Study of 3D Imaging Modalities for Female Amniote Reproductive Anatomy

May 10, 2022

Cofilactin filaments regulate filopodial structure and dynamics in neuronal growth cones

May 04, 2022

The effects of preloading on tensile properties of braided polyarylate fiber ropes

April 20, 2022

4D nanoimaging of early age cement hydration

April 17, 2022

A new juvenile Yamaceratops (Dinosauria, Ceratopsia) from the Javkhlant Formation (Upper Cretaceous) of Mongolia

April 05, 2022

Steel fiber orientational distribution and effects on 3D printed concrete with coarse aggregate

April 05, 2022

The ant abdomen: The skeletomuscular and soft tissue anatomy of Amblyopone australis workers (Hymenoptera: Formicidae)

April 03, 2022

Three-Dimensional Distribution of Platinum Group Minerals in Natural MSS-ISS Ores From the Norilsk One Deposit, Russia

March 23, 2022

Artificial Intelligence as a Tool to Study the 3D Skeletal Architecture in Newly Settled Coral Recruits: Insights into the Effects of Ocean Acidification on Coral Biomineralization

March 09, 2022

Efficient light-harvesting of mesophotic corals is facilitated by coral optical traits

February 20, 2022

X-ray microscopy enables multiscale high-resolution 3D imaging of plant cells, tissues, and organs

February 19, 2022

Validation of Deep Learning Segmentation of CT Images of Fiber-Reinforced Composites

February 18, 2022

Deep-Learning Segmentation of Clogging Patterns of Cylindrical Drip Emitters with Varied Geometric Features

February 15, 2022

Cranial osteology of Hypoptophis (Aparallactinae: Atractaspididae: Caenophidia), with a discussion on the evolution of its fossorial adaptations

January 30, 2022

Transdermal delivery of insulin across human skin in vitro with 3D printed hollow microneedles

January 24, 2022

Biotite supports long-range diffusive transport in dissolution–precipitation creep in halite through small porosity fluctuations

January 10, 2022

ACE2-containing defensosomes serve as decoys to inhibit SARS-CoV-2 infection

December 31, 2021

Effects of post-treatment to improve the surface quality of 3D printing cement mold casting

December 09, 2021

Extrusion-based additive manufacturing of Mg-Zn alloy scaffolds

December 08, 2021

Quantitative super-resolution microscopy reveals promoting mitochondrial interconnectivity protects against AKI

December 07, 2021

Evaluating the toxicity of microplastics and nanoplastics to Drosophila melanogaster

December 06, 2021

Reduced osteogenic differentiation potential in vivo in acute myeloid leukaemia patients correlates with decreased BMP4 expression in mesenchymal stromal cells

December 05, 2021

Determination of selective layer thickness and permeability of PAN and PES polymeric filtration membranes using 3D FIB/SEM

December 05, 2021

Rare evidence of shark-on-shark trophic interactions in the fossil record

December 04, 2021

OMA1 mediates local and global stress responses against protein misfolding in CHCHD10 mitochondrial myopathy

December 03, 2021

SHIP164 is a chorein motif containing lipid transport protein that controls membrane dynamics and traffic at the endosome-Golgi interface

December 01, 2021

Extreme suction attachment performance from specialised insects living in mountain streams (Diptera: Blephariceridae)

November 12, 2021

Extraordinary eyes reveal hidden diversity within the holopelagic genus Paraphronima (Amphipoda: Hyperiidea)

November 11, 2021

Data related to architectural bone parameters and the relationship to Ti lattice design for powder bed fusion additive manufacturing

November 09, 2021

The argonaut constructs its shell via physical self-organization and coordinated cell sensorial activity

November 05, 2021

Early development of the cortical layers in the human brain

November 04, 2021

Evaluation of the behavior of carbon short fiber reinforced concrete (CSFRC) based on a multi-sensory experimental investigation and a numerical multiscale approach

November 02, 2021

Effect of fluid properties on contact angles in the eagle ford shale measured with spontaneous imbibition

November 02, 2021

Growth and development of trabecular structure in the calcaneus of Japanese macaques (Macaca fuscata) reflects locomotor behavior, life-history, and neuromuscular development

October 07, 2021

Performance, successes and limitations of deep learning semantic segmentation of multiple defects in transmission electron micrographs

October 06, 2021

Osteocalcin attenuates oligodendrocyte differentiation and myelination via GPR37 signaling in the mouse brain

October 05, 2021

Deconstructing the Gestalt: New concepts and tests of homology, as exemplified by a re-conceptualization of “microstomy” in squamates

October 03, 2021

Identification of deposited oil structures on thin porous oil mist filter media applying µ-CT imaging technique

October 02, 2021

Water-mediated adhesion of oil sands on solid surfaces at low temperature

October 01, 2021

Non-viral gene delivery embedded in biomimetically mineralized matrices for bone tissue engineering

September 17, 2021

Females and males exhibit similar functional, mechanical, and morphological outcomes in a rat model of posttraumatic elbow contracture

September 16, 2021

Influence of curing temperature on belite cement hydration: A comparative study with Portland cement

September 15, 2021

Nondestructive characterization of laser powder bed fusion components using high-frequency phased array ultrasonic testing

September 15, 2021

Quantitative microstructural investigation of 3D-printed and cast cement pastes using micro-computed tomography and image analysis

September 14, 2021

Fabrication and delivery of mechano-actived microcapsules containing osteogenic factors in a large animal model of osteochondral injury

September 12, 2021

Complete neuroanatomy of dragonfly wings suggests direct sensing of aeroelastic deformations

September 12, 2021

Testbeds for advancement of powder bed additive manufacturing with application to reactive binder jetting of ceramics

September 11, 2021

Tailored grain morphology via a unique melting strategy in electron beam-powder bed fusion

September 10, 2021

Synchrotron imagery of phosphatized eggs in Waptia cf. W. fieldensis from the middle Cambrian (Miaolingian, Wuliuan) Spence Shale of Utah

September 06, 2021

Leafy and weedy seadragon genomes connect genic and repetitive DNA features to the extravagant biology of Syngnathid fishes

September 05, 2021

Cofilin regulates filopodial structure and flexibility in neuronal growth cones

September 04, 2021

Multiscale numerical simulation of the forming process of biaxial braids during thermoplastic braid-trusion: Predicting 3D and internal geometry and fiber orientation distribution

September 03, 2021

Characterization of the air void content of fine aggregate matrices within asphalt concrete mixtures

September 02, 2021

Advanced detection of wellbore failure for safe and secure utilization of subsurface infrastructure

September 01, 2021

Anisotropic microstructure dependent mechanical behavior of 3D-printed basalt fiber-reinforced thermoplastic composites

August 19, 2021

Measurement of regional pleural deformation during mechanical ventilation by ultrasonic elastography: A proof of concept study

August 19, 2021

The cranial anatomy and relationships of Cardiocorax mukulu (Plesiosauria: Elasmosauridae) from Bentiaba, Angola

August 18, 2021

The erroneous chondrichthyan egg case assignments from the Devonian: implications for the knowledge on the evolution of the reproductive strategy within chondrichthyans

August 18, 2021

Two heads are not always better than one: Craniofacial and axial bifurcation in cheloniid embryos and hatchlings (Chelonia mydas and Caretta caretta)

August 17, 2021

Tracking of individual TRISO-fueled pebbles through the application of X-ray imaging with deep metric learning

August 16, 2021

The accessibility of the cell wall in Scots Pine (Pinus sylvestris L.) Sapwood to colloidal Fe3O4 nanoparticles

August 15, 2021

Plicidentine and the repeated origins of snake venom fangs

August 14, 2021

Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance

August 11, 2021

Exploring the use of micro-computed tomography (micro-CT) in the taxonomy of sea cucumbers: A case-study on the gravel sea cucumber Neopentadactyla mixta (Östergren, 1898) (Echinodermata, Holothuroidea, Phyllophoridae)

August 10, 2021

The use of X-ray microtomography to investigate the shear behavior of hybrid fiber reinforced strain hardening cementitious composites

August 10, 2021

Surface, microstructure, and tensile deformation characterization of LPBF SS316L microstruts micromachined with femtosecond laser

August 09, 2021

Increased volume and collagen crosslinks drive soft tissue contribution to post-traumatic elbow contracture in an animal model

August 07, 2021

Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds

August 05, 2021

Direct ink writing of ZrB2-SiC chopped fiber ceramic composites

August 05, 2021

Degradation of ancient Maya carved tuff stone at Copan and its bacterial bioconservation

August 04, 2021

Quantitative evaluation of encrustations in Double-J ureteral stents with micro-computed tomography and semantic segmentation

August 04, 2021

New atomic force microscopy based analysis tools for investigation of multiphase flow and reactive transport in porous media

August 03, 2021

A quality optimization approach to image Achilles tendon microstructure by phase-contrast enhanced synchrotron micro-tomography

August 02, 2021

Carbonation rate and microstructural alterations of class G cement under geological storage conditions

August 02, 2021

A possible brachiosaurid (Dinosauria, Sauropoda) from the mid-Cretaceous of northeastern China

August 01, 2021

A critical review on pore to continuum scale imaging techniques for enhanced shale gas recovery

July 14, 2021

Development of a defect-detection platform using photodiode signals collected from the melt pool of laser powder-bed fusion

July 12, 2021

Permeability and mineralogy of the Újfalu Formation, Hungary, from production tests and experimental rock characterization: Implications for geothermal heat projects

July 08, 2021

Determination of the air void content of asphalt concrete mixtures using artificial intelligence techniques to segment micro-CT images

July 08, 2021

High-speed synchrotron X-ray phase-contrast imaging for evaluating microscale damage mechanisms and tracking cracking behaviors inside cross-ply GFRCs

July 08, 2021

Microstructural characteristics and their impact on mechanical properties of steel-PVA fiber reinforced concrete

July 07, 2021

X-ray microtomography–based atlas of mouse cranial development

July 06, 2021

Carbonation of calcium-magnesium pyroxenes: Physical-chemical controls and effects of reaction-driven fracturing

July 05, 2021

Centralizing digital resources for data management, processing, and analysis for enterprise scale imaging research

July 05, 2021

Influence of drug load on the printability and solid-state properties of 3D-printed naproxen-based amorphous solid dispersion

July 05, 2021

3D imaging reveals potential anticipatory responses to increasing intraspecific competition in the Drosophila male reproductive system

July 04, 2021

Deep learning-based segmentation of high-resolution computed tomography image data outperforms commonly used automatic bone segmentation methods

July 04, 2021

The cibarial pump of the xylem-feeding froghopper Philaenus spumarius produces negative pressures exceeding 1 MPa

July 03, 2021

3D imaging of shark egg cases (Palaeoxyris) from Sweden with new insights into Early Jurassic shark ecology

July 02, 2021

In utero adenine base editing corrects multi-organ pathology in a lethal lysosomal storage disease

July 01, 2021

Does the symmetry of patellar morphology matter when matching osteochondral allografts for osteochondral defects involving the central ridge of the patella?

June 14, 2021

Biochar alters hydraulic conductivity and inhibits nutrient leaching in two agricultural soils

June 13, 2021

Investigation of manufacturing defects in 3D-printed CFRP using laser ultrasonic testing and x-ray micro-computed tomography

June 12, 2021

Columnar-to-equiaxed grain transition in powder bed fusion via mimicking casting solidification and promoting in situ recrystallization

June 10, 2021

Scarce ctenacanthiform sharks from the Mississippian of Austria with an analysis of Carboniferous elasmobranch diversity in response to climatic and environmental changes

June 09, 2021

A staged approach to erosion analysis of wind turbine blade coatings

June 09, 2021

A new giant sauropod, Australotitan cooperensis gen. et sp. nov., from the mid-Cretaceous of Australia

June 08, 2021

Phase and microstructure evolutions in LC3 binders by multi-technique approach including synchrotron microtomography

June 07, 2021

Pore microstructure impacts on lithium ion transport and rate capability of thick sintered electrodes

June 06, 2021

Ultrastructural studies of developing egg tooth in grass snake Natrix natrix (Squamata, Serpentes) embryos, supported by X-ray microtomography analysis

June 06, 2021

Implant resonance and the mechanostat theory: Applications of therapeutic ultrasound for porous metallic scaffolds

June 04, 2021

Experimental investigations of micro-meso damage evolution for a Co/WC-Type tool material with application of digital image correlation and machine learning

June 04, 2021

Crystallization behavior of air-plasma-sprayed ytterbium-silicate-based environmental barrier coatings

June 02, 2021

Quasi-continuous production and separation of lysozyme crystals on an integrated laboratory plant

June 02, 2021

A laboratory-scale binder jet additive manufacturing testbed for process exploration and material development

June 01, 2021

New insights into patterns and rates of tooth replacement in serrasalmid and characid fishes, with implications for the subsistence fishery of Peru’s remote ribereños villages

May 13, 2021

Correlation of organelle dynamics between light microscopic live imaging and electron microscopic 3D architecture using FIB-SEM Keisuke O

May 12, 2021

Design and fabrication of flexible capacitive sensor with cellular structured dielectric layer via 3D printing

May 11, 2021

Additively manufactured gradient porous Ti–6Al–4V hip replacement implants embedded with cell-laden gelatin methacryloyl hydrogels

May 10, 2021

Automated segmentation of microtomography imaging of Egyptian mummies

May 08, 2021

Deformation mechanisms in ice-templated alumina–epoxy composites for the different directions of uniaxial compressive loading

May 07, 2021

The influence of divergent laser beams on the laser powder bed fusion of a high reflectivity aluminium alloy

May 07, 2021

Post-corrosion mechanical properties of absorbable open cell iron foams with hollow struts

May 06, 2021

Impact of applying a skin compression with the ultrasound probe on carotid artery strain elastography

May 05, 2021

Additive manufacture of porous ceramic proximal interphalangeal (PIP) joint implant: design and process optimization

May 03, 2021

Maximizing the performance of 3D printed fiber-reinforced composites

May 03, 2021

Rab34 GTPase mediates ciliary membrane formation in the intracellular ciliogenesis pathway

May 02, 2021

Metabolic design in a model of extreme mammalian metabolism, the North American least shrew (Cryptotis parva)

May 01, 2021

Dynamic few-view x-ray imaging for inspection of CAD-based objects

April 20, 2021

Microfluidic-like fabrication of a vanadium-cured bioadhesive by mussels

April 19, 2021

Rethinking the use of finite element simulations in comparative biomechanics research

April 18, 2021

Fiber-level numerical simulation of biaxial braids for mesoscopic morphology prediction validated by X-ray computed tomography scan

April 18, 2021

Vacuum plasma sprayed porous titanium coating on polyetheretherketone for ACDF improves the osteogenic ability: An in vitro and in vivo study

April 17, 2021

Micro-computed tomographic evaluation of single-cone obturation with three sealers

April 16, 2021

Complete neuroanatomy and sensor maps of Odonata wings for fly-by-feel flight control

April 15, 2021

Characterization and modelling of additively manufactured Hastelloy X parts under quasi-static and cyclic loading

April 14, 2021

Microstructure and water absorption of ancient concrete from Pompeii : An integrated synchrotron microtomography and neutron radiography characterization

April 07, 2021

3D X-ray microscopy of ultrasonically welded aluminum/fiber-reinforced polymer hybrid joints

April 04, 2021

New insights into sperm ultrastructure through enhanced scanning electron microscopy

April 02, 2021

A 3D-printed polymer–lipid-hybrid tablet towards the development of bespoke SMEDDS formulations

April 01, 2021

Collagen pentablock copolymers form smectic liquid crystals as precursors for mussel byssus fabrication

April 01, 2021

First record of a giant bird (Ornithuromorpha) from the uppermost Maastrichtian of the Southern Pyrenees, northeast Spain

April 01, 2021

Mitigation of mechanical membrane degradation in fuel cells by controlling electrode morphology: A 4D In Situ structural characterization

March 30, 2021

Polydopamine functionalized VEGF gene-activated 3D printed scaffolds for bone regeneration

March 27, 2021

Modification of CO2 capture and pore structure of hardened cement paste made with nano-TiO2 addition: Influence of water-to-cement ratio and CO2 exposure age

March 26, 2021

Identification of durable and non-durable FeNx sites in Fe–N–C materials for proton exchange membrane fuel cells

March 25, 2021

Correlative microscopy: a tool for understanding soil weathering in modern analogues of early terrestrial biospheres

March 24, 2021

Effect of autogenous crack self-healing on mechanical strength recovery of cement mortar under various environmental exposure

March 23, 2021

Gestational intermittent hyperoxia rescues murine genetic congenital heart disease in part

March 23, 2021

Hydrophobic porous polypropylene with hierarchical structures for ultrafast and highly selective oil/water separation

March 23, 2021

In-situ cutting temperature and machining force measurements during conventional drilling of carbon fiber polymer composite laminates

March 22, 2021

Three-dimensional vessel segmentation in whole-tissue and whole-block imaging using a deep neural network: Proof of concept study

March 21, 2021

Novel preclinical method for evaluating the efficacy of a percutaneous treatment in human ex vivo calcified plaque

March 20, 2021

Internal insulation and corrosion control of molten chloride thermal energy storage tanks

March 19, 2021

Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding

March 19, 2021

Filtration of kaolinite and coal mixture suspension: Settling behavior and filter cake structure analysis

March 18, 2021

A three-dimensional approach to visualize pairwise morphological variation and its application to fragmentary palaeontological specimens

March 17, 2021

Enhancement of oil recovery by emulsion injection: A pore scale analysis from X-ray micro-tomography measurements

March 17, 2021

Tribology in space robotic actuators: Experimental method for evaluation and analysis of gearboxes

March 16, 2021

Spattering and oxidation phenomena during recycling of low alloy steel powder in laser powder bed fusion

March 10, 2021

ER exit sites in Drosophila display abundant ER-Golgi vesicles and pearled tubes but no megacarriers

March 09, 2021

Influence of layup, stacking sequence and loading rate on energy absorption of tension-absorber joints

March 09, 2021

Crystallographic tomography and molecular modelling of structured organic polycrystalline powders

March 02, 2021

Customization of residual stress induced in cold spray printing

March 02, 2021

An expanded diversity of oomycetes in Carboniferous forests: Reinterpretation of Oochytrium lepidodendri(Renault 1894) from the Esnost chert, Massif Central, France

March 02, 2021

Muscle-bone crosstalk in the masticatory system: From biomechanical to molecular interactions

March 02, 2021

Deletion of Fibroblast growth factor 9 globally and in skeletal muscle results in enlarged tuberosities at sites of deltoid tendon attachments

February 28, 2021

Long-term effects of humidity on stainless steel pitting in sea salt exposures

February 25, 2021

Development and experimental validation of a texture-based 3D liberation model

February 22, 2021

Failure mechanisms and bending strength of Fuchsia magellanica var. gracilis stems

February 19, 2021

Presence of neovascularization in torn plantar plates of the lesser metatarsophalangeal joints

February 18, 2021

Evidence for the evolution of eusociality in stem ants and a systematic revision of Gerontoformica (Hymenoptera: Formicidae)

February 14, 2021

First highlight of sound production in the glassy sweeper Pempheris schomburgkii (Pempheridae)

February 13, 2021

TOF-SIMS Molecular imaging and properties of pMDI-bonded particleboards made from cup-plant and wood

February 10, 2021

Micro-scale chemical and physical patterns in an interface of hydrothermal dolomitization reveals the governing transport mechanisms in nature: Case of the Layens anticline, Pyrenees, France

February 06, 2021

Operando particle-scale characterization of silicon anode degradation during cycling by ultrahigh-resolution x-ray microscopy and computed tomography

February 05, 2021

3D morphology of nematode encapsulation in snail shells, revealed by micro-CT imaging

January 28, 2021

Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites

January 21, 2021

Ancient egyptian subadult mummies: Unwrapping childhood in the ancient past

January 19, 2021

Bioprinting of magnetically deformable scaffolds

January 19, 2021

A proline rich protein from the gingival seal around teeth exhibits antimicrobial properties against Porphyromonas gingivalis

January 19, 2021

Cholesterol removal via cyclodextrin-decoration on cellulose nanocrystal (CNC)-grafted poly(HEMA-GMA) nanocomposite adsorbent

January 19, 2021

Dependence of mechanical properties and microstructure on solidification onset temperature for Al2024–CaB6 alloys processed using laser powder bed fusion

January 19, 2021

Development of processing techniques for the fabrication of pure copper components utilizing EB-PBF

January 19, 2021

Influence of water-to-binder ratio on the optimum percentage of nano-TiO2 addition in terms of compressive strength of mortars: A laboratory and virtual experimental study based on ANN model

January 18, 2021

Morphology and composition of Goldeye (Hiodontidae; Hiodon alosoides) otoliths

January 17, 2021

Muscular loading affects the 3D structure of both the mineralized rudiment and growth plate at early stages of bone formation

January 14, 2021

Insights into skull evolution in fossorial snakes, as revealed by the cranial morphology of Atractaspis irregularis (Serpentes: Colubroidea)

January 13, 2021

Non-destructive characterization of additively manufactured components with x-ray computed tomography for part qualification: A study with laboratory and synchrotron x-rays

January 12, 2021

4D imaging of ZnO-coated nanoporous Al2O3 aerogels by chemically sensitive ptychographic tomography: Implications for designer catalysts

January 10, 2021

Nondestructive quantitative evaluation of yarns and fabrics and determination of contact area of fabrics using the x-ray microcomputed tomography system for skin-textile friction analysis

January 09, 2021

Polystyrene micro and nanoplastics affect locomotion and daily activity of Drosophila melanogaster

January 09, 2021

Thermoregulation and heat exchange in ospreys (Pandion haliaetus)

January 07, 2021

The use of non-spherical powder particles in laser powder bed fusion

January 06, 2021

Tooth attachment and pleurodont implantation in lizards: Histology, development, and evolution

December 29, 2020

Lower jaw morphology of Adalatherium hui (Mammalia, Gondwanatheria) from the late Cretaceous of Madagascar

December 18, 2020

Craniofacial morphology of Adalatherium hui (Mammalia, Gondwanatheria) from the Late Cretaceous of Madagascar

December 18, 2020

Laser powder bed fusion with intentionally-seeded porosity for prototyping of powder metallurgy parts

December 11, 2020

Relationship between altered knee kinematics and subchondral bone remodeling in a clinically translational model of ACL injury

December 09, 2020

Plasma focused ion beam serial sectioning as a technique to characterize nonmetallic inclusions in superelastic nitinol fine wires

December 08, 2020

Phenotypes, developmental basis, and genetics of Pierre Robin complex

December 05, 2020

Direct measure of electrode spatial heterogeneity: Influence of processing conditions on anode architecture and performance

December 02, 2020

Nonviral gene delivery embedded in biomimetically mineralized matrices for bone tissue engineering

November 26, 2020

Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel

November 25, 2020

Volumetric evaluation of five root canal obturation methods in TrueTooth™ 3D-printed tooth replicas using nano-computed tomography

November 25, 2020

Light-harvesting in mesophotic corals is powered by a spatially efficient photosymbiotic system between coral host and microalgae

November 24, 2020

Females and males exhibit similar functional, mechanical and morphological outcomes in a rat model of posttraumatic elbow contracture

November 22, 2020

Multiscale cardiac imaging spanning the whole heart and its internal cellular architecture in a small animal model

November 20, 2020

The characterization of bituminous coal microstructure and permeability by liquid nitrogen fracturing based on μCT technology

November 19, 2020

Adding the third dimension to studies of parallel evolution of morphology and function: An exploration based on parapatric lake‐stream stickleback

November 17, 2020

Craniomandibular osteology of Macrocollum itaquii (Dinosauria: Sauropodomorpha) from the Late Triassic of southern Brazil

November 12, 2020

Pathway to complete energy sector decarbonization with available iridium resources using ultralow loaded water electrolyzers

November 12, 2020

X-ray micro tomography study of internal defects of electron beam melted Ti6Al4V and their effect on fatigue behavior

November 12, 2020

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

November 06, 2020

An open, modular, and flexible micro X-ray computed tomography system for research

November 03, 2020

Rab34 GTPase mediates ciliary membrane biogenesis in the intracellular ciliogenesis pathway

October 29, 2020

A rapid, nondestructive method for vascular network visualization

October 28, 2020

Non-destructive characterization of physical and chemical clogging in cylindrical drip emitters

October 27, 2020

Preclinical translation of therapeutic interventions for tendon injury

October 19, 2020

Revealing the growth kinetics of atmospheric corrosion pitting in aluminum via in situ microtomography

October 16, 2020

YAP and TAZ mediate osteocyte perilacunar/canalicular remodelingr

October 14, 2020

New Crassigyrinus-like fibula from the Tournaisian (earliest Carboniferous) of Nova Scotia

October 13, 2020

Pore space characteristics and corresponding effect on tensile properties of ifnconel 625 fabricated via laser powder bed fusion

October 09, 2020

Interfacial adhesion and self-healing kinetics of multi-stimuli responsive colorless polymer bilayers

October 02, 2020

Biomimetic antifreeze polymers: A natural solution to freeze-thaw damage in cement and concrete

October 02, 2020

Integrated three-dimensional characterization of reactive phase formation and coarsening during isothermal annealing of metastable Zn–3Mg–4Al eutectic

October 01, 2020

Biological stenciling of mineralization in the skeleton: Local enzymatic removal of inhibitors in the extracellular matrix

September 30, 2020

libMCXray: A Monte Carlo simulator for signal analysis inside Dragonfly software

September 25, 2020

Interpreting morphological adaptations associated with viviparity in the Tsetse fly Glossina morsitans (Westwood) by three-dimensional analysis

September 23, 2020

A neuroskeletal atlas of the mouse limb

September 19, 2020

Ellipsoidal mesoscale mineralization pattern in human cortical bone revealed in 3D by plasma focused ion beam serial sectioning

September 11, 2020

Physical and hydraulic properties of recycled glass as granular materials for pavement structure

September 11, 2020

Automated segmentation of computed tomography images of fiber-reinforced composites by deep learning

September 08, 2020

Application of computed tomography (CT) in geologic CO2 utilization and storage research: A critical review

September 06, 2020

Whole animal imaging of Drosophila melanogaster using microcomputed tomography

September 02, 2020

Do all geckos hatch in the same way? Histological and 3D studies of egg tooth morphogenesis in the geckos Eublepharis macularius Blyth 1854 and Lepidodactylus lugubris Duméril & Bibron 1836

August 17, 2020

Crossfibrillar mineral tessellation in normal and Hyp mouse bone as revealed by 3D FIB-SEM microscopy

August 14, 2020

Comparison of the mechanically compacted dry-mix and ordinary vibrated wet-mix glass concretes after exposure to elevated temperatures

August 11, 2020

Additive manufacturing of high loading concentration zirconia using high-speed drop-on-demand material jetting

August 06, 2020

X-ray computed tomography of severed root wounds of Prunus serrulata and Zelkova serrata

August 01, 2020

Characterization of ore texture crack formation and liberation by quantitative analyses of spatial deformation

July 30, 2020

Forget about cleaning up your micrographs: Deep learning segmentation is robust to image artifacts

July 30, 2020

Secondary fluorescence correction for quantitative X-ray microanalysis integrated in a user-friendly framework

July 30, 2020

Microscopy and image processing recordkeeping: Never again lose track of your metadata

July 30, 2020

3D-printed metal column for micro gas chromatography

July 28, 2020

Chain end-termination of p-Polybenzimidazole by bulk segment for efficient electrochemical power generation and hydrogen separation

July 22, 2020

Eomakhaira molossus, a new saber-toothed Sparassodont (Metatheria: Thylacosmilinae) from the early Oligocene (Tinguirirican) Cachapoal Locality, Andean Main Range, Chile

July 17, 2020

Fracture evolution in coalbed methane reservoirs subjected to liquid nitrogen thermal shocking

July 16, 2020

3D high spatial resolution visualisation and quantification of interconnectivity in polymer films

July 11, 2020

Mechanics and differential healing outcomes of small and large partial-thickness injuries of the rat rotator cuff

July 04, 2020

Detection and assessment of capsular invasion, vascular invasion and lymph node metastasis volume in thyroid carcinoma using microCT scanning of paraffin tissue blocks (3D whole block imaging): a proof of concept

July 02, 2020

Human bone mesoscale 3D structure revisited by plasma focused ion beam serial sectioning

July 02, 2020

Tools of the trade: MicroCT reveals native structure and functional morphology of organs that drive caterpillar–ant interactions

June 29, 2020

Australogale leptognathus, gen. et sp. nov., a second species of small Sparassodont (Mammalia: Metatheria) from the Middle Miocene Locality of Quebrada Honda, Bolivia

June 27, 2020

Using thin film freezing to minimize excipients in inhalable tacrolimus dry powder formulations

June 27, 2020

Effect of chemical vapor infiltration induced matrix porosity on the mechanical behavior of ceramic matrix minicomposites

June 26, 2020

Quantitative and qualitative bone imaging : A review of synchrotron radiation microtomography analysis in bone research

June 25, 2020

Site-1 protease ablation in the osterix-lineage in mice results in bone marrow neutrophilia and hematopoietic stem cell alterations

June 23, 2020

Combined mechanical and 3D-microstructural analysis of strain-hardening cement-based composites (SHCC) by in-situ X-ray microtomography

June 20, 2020

Serial scanning electron microscopy of anti-PKHD1L1 immuno-gold labeled mouse hair cell stereocilia bundles

June 17, 2020

Formation of a three-phase spiral structure due to competitive growth of a peritectic phase with a metastable eutectic

June 15, 2020

Three-dimensional analysis and visualization of morphological adaptations associated with viviparity in the Tsetse fly (Glossina morsitans)

June 14, 2020

Mapping Li-Ion transport through a ceramic electrolyte by X-ray computed tomography

June 10, 2020

Real time monitoring of electron emissions during electron beam powder bed fusion for arbitrary geometries and toolpaths

June 04, 2020

Inhibiting freeze-thaw damage in cement paste and concrete by mimicking nature’s antifreeze

May 27, 2020

Microstructure and water absorption of ancient concrete from Pompeii: An integrated synchrotron microtomography and neutron radiography characterization

May 27, 2020

Optimization of FIB–SEM tomography and reconstruction for soft, porous, and poorly conducting materials

May 22, 2020

Using anthropometrics and dental formation stages of contemporary children to investigate the impact of biological mortality bias on interpretations of past population health

May 22, 2020

On a method for reconstructing computed tomography datasets from an unstable source

May 19, 2020

The possible earliest epizoochorous fruit preserved in mid-Cretaceous Burmese amber

May 11, 2020

A high-performance solid oxide fuel cell with a layered electrolyte for reduced temperatures

May 08, 2020

First elaphrosaurine theropod dinosaur (Ceratosauria: Noasauridae) from Australia — A cervical vertebra from the Early Cretaceous of Victoria

May 06, 2020

Nanostructure of mouse otoconia

May 01, 2020

Deciphering an extreme morphology: Bone microarchitecture of the hero shrew backbone (Soricidae: Scutisorex)

April 29, 2020

Altered topological blueprint of trabecular bone associates with skeletal pathology in humans

April 28, 2020

3D documentation and analysis of porosity in deteriorated historic brick

April 22, 2020

Morphing electronics enable neuromodulation in growing tissue

April 20, 2020

Discrimination of pores and cracks in iron ore pellets using deep learning neural networks

April 17, 2020

A non-destructive method for quantifying tissue vascularity using quantitative deep learning image processing

April 07, 2020

3-dimensional organization and dynamics of the microsporidian polar tube invasion machinery

April 04, 2020

Unique tooth morphology and prismatic enamel in late cretaceous sphenodontians from Argentina

March 26, 2020

A new specimen of Cardiocorax mukulu with a nearly complete cranium from Angola

March 20, 2020

Monster or multiplacophoran: A teratological specimen of the chiton Acanthopleura granulata (Mollusca: Polyplacophora) with a valve split into independent and symmetrical halves

March 18, 2020

Formation of liquid water pathways in PEM fuel cells: A 3-D pore-scale perspectives

March 06, 2020

Liquid nitrogen waterless fracking for the environmental protection of arid areas during unconventional resource extraction

March 04, 2020

Geometric deviations of laser powder bed–fused AlSi10Mg components: numerical predictions versus experimental measurements

February 28, 2020

Morphology of the vasculature and blood supply of the brown adipose tissue examined in an animal model by micro-CT

February 28, 2020

Turbulence generation through an iterative cascade of the elliptical instability

February 28, 2020

Porous metals from chemical dealloying for solid-state battery anodes

February 26, 2020

Latest advances in cardiac CT

February 26, 2020

Quantification of the morphology of gold grains in 3D using x-ray microscopy and SEM photogrammetry

February 23, 2020

Multiscale analysis of MnS inclusion distributions in high strength steel

February 22, 2020

4D in situ visualization of mechanical degradation evolution in reinforced fuel cell membranes

February 22, 2020

The structural origins of brittle star arm kinematics: An integrated tomographic, additive manufacturing, and parametric modeling-based approach

February 20, 2020

Variational and deep learning segmentation of very-low-contrast x-ray computed tomography images of carbon/epoxy woven composites

February 20, 2020

Alteration and carbonation of calcium and magnesium silicates: implications on capture, storage and use of CO2

February 17, 2020

Functional requirements of data analytic tools and software for metal additive manufacturing

February 16, 2020

The effect of wood composition and supercritical CO2 extraction on charcoal production in ferroalloy industries

February 15, 2020

Developmentally-orchestrated mitochondrial processes prime the selection against harmful mtDNA mutations

February 13, 2020

Increased carotid artery wall stiffness and plaque prevalence in HIV infected patients measured with ultrasound elastography

February 12, 2020

Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate

February 01, 2020

A multimethod analysis to assess locomotor capabilities in stem tetrapods from Blue Beach (Tournaisian; Early Carboniferous), Nova Scotia

January 30, 2020

3D-focused ion beam tomography and quantitative porosity evaluation of ZrO2-SiO2 composite coating; amorphous SiO2 as a porosity tailoring agent

January 30, 2020

Contralateral lateral femoral condyle allografts provide an acceptable surface match for simulated classic osteochondritis dissecans lesions of the medial femoral condyle

January 28, 2020

Application of deep learning convolutional neural networks for internal tablet defect detection: high accuracy, throughput, and adaptability

January 23, 2020

Multi‐step crystallization of self‐organized spiral eutectics

January 23, 2020

Auto-stratigraphic evolution of experimental crater-fill basins: Implications for interpreting Mars sequence stratigraphy and paleoclimate

January 20, 2020

Ontogenetic growth pattern of the extinct megatooth shark Otodus megalodon—implications for its reproductive biology, development, and life expectancy

January 11, 2020

Cryopolymerization enables anisotropic polyaniline hybrid hydrogels with superelasticity and highly deformation-tolerant electrochemical energy storage

January 07, 2020

Pore morphology characterization and its effect on methane desorption in water-containing coal: An exploratory study on the mechanism of gas migration in water-injected coal seam

January 07, 2020

The iliosacral joint in lizards: an osteological and histological analysis

January 05, 2020

Quantitative 3D reconstruction of porous polymers using FIB-SEM tomography

January 01, 2020

Nondestructive examination of uranium oxide kernels using energy-resolved neutron imaging

December 21, 2019

Microstructure characterization of rolled Al-Si-Mg-Fe alloy by three-dimensional tomography

December 19, 2019

Carotid artery non invasive elastography (NIVE) to detect early changes of cardiovascular diseases in overweight and obese children

December 09, 2019

Introduction to practical AI image processing and analysis without programming

November 21, 2019

The larval morphology of the spongefly Sisyra nigra (Retzius, 1783) (Neuroptera: Sisyridae)

October 07, 2019

Technology for technology’s sake: The technical study of gothic miniature boxwood carvings in the Thomson Collection at the Art Gallery of Ontario

August 13, 2019

Bubbles in the bullion: micro-CT imaging of the internal structure of ancient coins

August 05, 2019

Extending Monte Carlo simulations of electron microscopy images and hyperspectral images in a user-friendly framework

August 05, 2019

Simplifying and streamlining large-scale materials image processing with WizardDriven and scalable deep learning

August 05, 2019

Using deep learning to deconvolute complex spectra for hyperspectral imaging applications

August 05, 2019

Workflow automation and portability enable high throughput image processing and segmentation for cell biology systems

August 05, 2019

Development of Standard Operating Procedure (SOP) of micro-computed tomography (micro-CT) in pathology

July 10, 2019

Pore-scale liquid water visualization for understanding water transport in operating fuel cells

July 03, 2019

Melting mode thresholds in laser powder bed fusion and their application towards process parameter development

June 21, 2019

Influence of particle size of glass aggregates on the high temperature properties of dry-mix concrete blocks

June 10, 2019

4D embryogenesis study using X-Ray micro-CT

May 23, 2019

Publication Index

References to scientific publications citing Dragonfly.

Below are references to scientific publications in which Dragonfly was cited.